Thank you for visiting our Pro-Shop
Home of Cheap Quick Shipping $2.00 For
Total Order
Ghost Glock 3.5lb Trigger Assembly
40/357/9mm/10mm/45
$45.00
FOR LAW ENFORCEMENT AND SELF DEFENSE ONLY
We have combined an electro-polished 3.5 LB. Drop-in
Trigger connector with a Wolff 6.0 LB. firing pin
spring, a Wolff 6.0 LB. Trigger spring. These
combinations will give you the lightest smoothest
drop-in trigger assembly you can
buy! FOR SELF DEFENSE ONLY. The connector, spring &
trigger assembly along with a new trigger block are
included in this kit. We assembled the trigger,
connector, spring and block to save you the hassle
and makes a drop in unit. You will only have to
install the firing pin spring and the firing pin safety spring.
IF YOU ARE NOT COMPETENT TO DO THIS USE A
CERTIFIED GUNSMITH.
New and Improved design gives you an even better &
smoother trigger pull! Better than all the others guaranteed!
The GHOST INC. 3.5 LB precision connector is designed &
manufactured to exacting tolerances and is polished to ensure
the smoothest trigger function possible. Ghost's 3.5 lb connector
gives you a slightly shorter and crisper trigger break with a positive
reset. No more mushy feeling Glock triggers. YOU MAY USE THIS
CONNECTOR FOR ALL LAWFULL ACTIVITIES. ALWAYS KEEP YOUR
FINGER OFF THE TRIGGER UNTIL YOU ARE ABSOLUTELY POSITIVE
YOU NEED TO FIRE IMMEDIATELY! No Risk 100% Satisfaction
guaranteed or your money gladly refunded!
Specify Model and Caliber When Ordering
Complete Ghost Glock Ultimate 3.5lb
Ghost Glock 3.5lb Trigger Assembly
40/357/9mm/10mm/45
$50.00
LAW ENFORCEMENT AND SELF DEFENSE ONLY
We have combined our polished Ultimate 3.5 LB.
Drop-in Trigger Connector with Two Wolff Premium
Springs 1-Wolff 6.0 LB. firing pin spring 1- Wolff 6.0 LB.
trigger spring . These combinations will give you the
benefits of a self cleaning trigger connector with the
lightest, safest & smoothest drop-in trigger assembly
you can buy!
FOR SELF DEFENSE ONLY
The connector, spring & trigger assembly along with a
new trigger block are included in this kit. We assembled
the trigger, connector, spring and block to save you the
hassle and make a drop in unit. You will only have to
install the firing pin spring . Glock.
IF YOU ARE NOT COMPETENT TO DO THIS USE A CERTIFIED GUNSMITH.
The Ultimate in Drop-in 3.5 lb trigger connectors. The
Ultimate incorporates the patent pending debris channels
which removes debris From the trigger mechanism and reduces
the friction of the trigger parts making the Ultimate
smooth and self cleaning. Why is self cleaning so important?
Because as you fire your pistol debris builds up on the trigger
mechanism surfaces. These debris cause additional friction.
This friction increases the weight of the trigger pull thus
increasing the force applied to the connector. As the trigger pull
weight increases the connector is pushed towards the rear
of the trigger housing eventually far enough that the pistol will
not fire! The channels also reduce the thickness of the connector
body by 33%. This reduction increases reset speed and because
these channels are located on the centerline of the
connector body they do not cause connector torsioning. These
features along with polishing gives you the Ultimate in light
smooth 3.5 lb trigger pulls.
YOU MAY USE THIS CONNECTOR FOR ALL LAWFULL ACTIVITIES. ALWAYS
KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOU ARE ABSOLUTELY
POSITIVE YOU NEED TO FIRE IMMEDIATELY! No Risk 100% Satisfaction
guaranteed or your money gladly refunded!
AVAILABLE IN US ONLY
Specify Model and Caliber When Ordering
Glock 9mm Small Parts Kit
$65.00
GLOCK OEM Extended Slide Release
$17.99
This is the best selling Glock Accessory and the one most essential.
Fits Models: 18/19/20/21/22/23/24/25/26/27/28/29/30/31/32/33
34/35/37 & 17 with three frame pins. This is a Glock OEM extended
slide stop. It fits all 3 pin guns. (the 3 pins are; trigger, locking block
and trigger housing) except M/36,37,38,39. Also fits early G-19's with
two pins. May be marked 2912, 2912-2, or 2912-3. DOES NOT fit early
17,17L,34 2 pin guns.
Remove & Replace Slide Release
pictures & Instructions
Glock Extended Slide &
Magazine Release
$18.99
Glock Extended Magazine Release
$8.99
Faster magazine release for faster magazine changes.
This Glock extended magazine release is for all Glock 9mm,
40 S&W, 357, and 45 GAP models. Fits Models: 17/18/19/22
23/24/25/26/27/28/31/32/33/34/35/36/37/38/39.
Need 3 Try This Deal
$18.00
GLOCK OEM MAGAZINE
FOLLOWERS
$4.00 ea or 2 for $6.00
Replacing your magazine follower will prevent
failure to feed problems as well holding the
slide open after the last shot. These are for
the following calibers
40 Cal 357
9mm 9mm 10 Round Only
Firing Pin Spacer Sleeve 40/357/9mm
$4.00
Trigger Bar 40/357/9mm/10/45
$12.50
State Model When Ordering
Trigger Housing 9mm Trigger Housing 40/357
$6.99 $6.99
Trigger Housing 10mm/45
$7.99
Glock OEM slide stop (used)
$2.00
Came from a new Glock 23
Glock Firing Pin & Trigger Spring Kit
$10.00
Glock Firing Pin & Trigger Spring Kit. Glock recommends replacing all
springs annually or every thousand rounds. If you are concerned
about light primer strikes or your trigger spring breaking don't take
a chance replace them both
Glock Standard Firing Pin Cups
$6.00
Glock Spring Cups Standard. These are called the
million dollar parts. Because if you loose one your
pistol is worthless. So it's worth a million bucks
to have a spare set. These parts work on all
Glocks-1 size fits all!
Spring Cups Maritime
$10.99
Limited Availability-Fits All Glock Models
Maritime/Marine Spring Cups enable your Glock
to shoot underwater and under hostile environmental
conditions. They ensure that even with water and or
debris inside your Glocks firing pin channel your Glock
pistol will fire! Great for those who prefer a Glock for
predators on shore as well as in the water. Glock will
only sell this item to law enforcement agencies and
the military with an official purchase letter on agency
letterhead. We have them in stock for a limited time.
This is the one item that is specified by teams that
are on the tip of the spear! These are called the million
dollar parts. Because if you loose one your pistol is
worthless. So it's worth a million bucks to have a
spare set. These parts work on all Glocks-1 size fits all!
Armorer's Tool
$6.00
Used to disassemble all Glock pistols
Orange Armorer's Slide Plate
$3.99
Orange Armorer's Slide Plate. This plate is sectioned by 1/3 to permit
viewing of the sear and firing pin engagement. This aids in custom
fitting the Rocket & Tactical Triggers.
Slide Cover Plate
$4.99
Keep your Glock looking good with a new slide plate
Slide cover plate for the rear of the slide fits all Glock Models
This is a must have spare item.
Magazine Springs & Followers G22
$18.99
These are OEM 11 coil springs and followers
for the Glock 22. You get two springs and
two followers in this set.
Magazine Springs & Followers G23
$18.99
These are OEM springs and followers
for the Glock 23. You get two springs and
two followers in this set.
Hi Cap G23 13 Round Magazine 40/357
$21.99
High capacity magazines are the latest and greatest offering from
Glock. They function in .40 & 357 caliber pistols. Great for models
26/27 & 33's. THESE ARE IN STOCK. Get yours before the next ban
which you know is coming! Avoid paying the painful prices you will
have to pay if you wait!!!
LIMITED QUANTITIES! We CAN NOT ship High Capacity Magazines
to California, District of Columbia, Maryland, Massachusetts,
New Jersey, Hawaii & New York.
ANY ITEM OF COMBINATION OF SHIPS
FOR $2.00 FIRST CLASS MAIL.
IN LOWER 48 STATES.
NO INTERNATIONAL SALES
Priority Shipping $5.00
Insurance $1.40
Payment Methods:
Invoice you via Paypal
Money Order Pay To:
Nathan McCracken
4130 Royal Palm Av
Cocoa, Fl. 32926